( 01 / 01 )Home AssistantConnect-ZBT-2 · HA-NC-ZBT-9741
Home AssistantConnect ZBT-2Zigbee
R 1 099R 1 199
Limited availabilityQuantity
1
R 1 099
12 monthly paymentsfrom R 92 / month
Illustrative estimate. Final payment terms are confirmed at checkout.DeliveryTiming to be confirmed
Delivery timing depends on confirmed stock, dispatch and your address.Home Assistant Connect ZBT-2 – Zigbee or Thread Adapter for Home Assistant
The Home Assistant Connect ZBT-2 is the official USB-C Zigbee 3.0 and Thread radio adapter for Home Assistant, designed by Nabu Casa, the team behind Home Assistant. It uses a Silicon Labs MG24 radio chip and a 460800 baud link – four times faster than the original ZBT-1 – for more responsive devices and a stable, reliable network.
Key Features
- Zigbee or Thread: dedicate the adapter to a Zigbee 3.0 network, or to Thread for Matter-over-Thread devices (one protocol at a time, not both simultaneously).
- Optimised antenna: omnidirectional antenna and base (4.16 dBi peak gain) for the best possible connection to your devices.
- 4x faster: 460800 baud versus 115200 on the ZBT-1, improving device responsiveness.
- Plug and play: start-up wizard, one-click updates and migration wizards for existing Zigbee or Thread networks; also works with Zigbee2MQTT.
- Cut the clutter: connect Zigbee devices you already own, such as Philips Hue and IKEA bulbs, directly to Home Assistant.
- Open design: no clips or glue, with accessible pads and pins and open-source firmware.
Specifications
- Radio: Silicon Labs MG24; ESP32-S3 USB-serial bridge
- Protocols: Zigbee 3.0, Thread
- Power/data: USB-C, 5 V DC, 500 mA
- Frequency range: 2400–2483.5 MHz
- Size and weight: 83 x 83 x 179 mm, 157 g
- Enclosure: polycarbonate, white and semi-transparent
- Operation: indoor use, 0 °C to 65 °C, non-condensing
In the Box
- Antenna and base
- 1.5 m USB-C cable
- Quick start guide
Pair it with Home Assistant Green for a single-hub Zigbee or Thread smart home.








