Home/Shop/Ortofon
OrtofonOrtofon 2M Blue - MM Cartridge

Ortofon 2M Blue MMCartridge

R 4 380
Available
Quantity
1
R 4 380
12 monthly paymentsfrom R 365 / month
Illustrative estimate. Final payment terms are confirmed at checkout.
Delivered byFriday, 04 September
Estimated from today, excluding weekends.

Ortofon 2M Blue - MM Cartridge

The Ortofon 2M Blue Moving Magnet (MM) cartridge delivers enhanced dynamics, increased output, and exceptional sonic accuracy, making it ideal for audiophiles seeking detailed and open sound reproduction.

Key Features

  • Improved motor design providing increased output of 5.5 mV
  • Optimised sound reproduction with high sonic accuracy
  • Nude Elliptical diamond stylus with split pole pins and copper wire
  • Greater dynamics and resolution compared to the 2M Red model

How to Replace M2.0 mm Screws on 2M Blue Verso

  1. Remove the stylus with the stylus protection guard from the cartridge body to avoid damage to the diamond.
  2. Using a Torx 8 key, unscrew the black screw from the Verso top plate.
  3. Remove the top plate from the cartridge body by pulling the screws off.
  4. Remove the two countersunk screws from the top plate.
  5. Insert the two M2.0 mm screws into the top plate.
  6. Mount the top plate on the cartridge body. Hold the top plate with screw threads hanging down and turn the cartridge body 180 degrees. Mount from above.
  7. Mount the black screw in the top plate and tighten with appropriate force.
  8. Mount the cartridge on the tonearm using the enclosed tool.
  9. Mount the stylus with the stylus protection guard on the cartridge body.

Specifications

  • Output voltage at 1000 Hz, 5 cm/sec: 5.5 mV
  • Channel balance at 1 kHz: 1.5 dB
  • Channel separation at 1 kHz: 25 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at -3 dB: 20 - 25,000 Hz
  • Frequency response: 20 - 20,000 Hz +2 / -1 dB
  • Tracking ability at 315 Hz at recommended tracking force: 80 µm
  • Compliance, dynamic, lateral: 20 µm/mN
  • Stylus type: Nude Elliptical
  • Stylus tip radius: r/R 8/18 µm
  • Tracking force range: 1.6 - 2.0 g (16 - 20 mN)
  • Recommended tracking force: 1.8 g (18 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 1.3 kOhm
  • Internal inductance: 700 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 150 - 300 pF
  • Cartridge colour, body/stylus: Black/Blue
  • Cartridge weight: 7.2 g

Pairs well with

Relatedequipment